Analysis of Control Methods for Overheating Phenomenon in Metal Heat Treatment
Release time:
2022-03-22
During the heat treatment process, overheating during heating can easily lead to coarsening of austenite grains, resulting in a decrease in the mechanical properties of the parts.
1、 Overheating phenomenon
During the heat treatment process, overheating during heating can easily lead to coarsening of austenite grains, resulting in a decrease in the mechanical properties of the parts.
1. General overheating
Overheating occurs when the heating temperature is too high or the holding time at high temperatures is too long, causing coarsening of austenite grains. Coarse austenite grains can lead to a decrease in the strength and toughness of the steel, an increase in the brittle transition temperature, and an increase in the tendency for deformation and cracking during quenching. The cause of overheating is the loss of the furnace temperature gauge or mixing of materials (often caused by lack of understanding of the process). The overheated structure can undergo annealing, normalizing, or multiple high-temperature tempering, and under normal circumstances, undergo re austenitization to refine the grains.
2. Fracture inheritance
Steel with overheated structure can refine austenite grains after reheating and quenching, but sometimes coarse granular fractures still appear. There are many controversies about the theory of fracture inheritance. It is generally believed that impurities such as MnS were dissolved into austenite and enriched at the grain interface due to excessive heating temperature. However, during cooling, these inclusions precipitate along the grain interface and are prone to fracture along the coarse austenite grain boundary when subjected to impact.
3. Genetics of coarse tissues
When steel parts with coarse martensite, bainite, and bainite structures are re austenitized, they are slowly heated to the conventional quenching temperature, or even lower, and the austenite grains are still coarse. This phenomenon is called structural inheritance. To eliminate the heritability of coarse structures, intermediate annealing or multiple high-temperature tempering treatments can be used.
Related News
Good news! Our company won the Changzhou Innovation and Entrepreneurship Competition!
What is homogenization annealing of metal heat treatment?
Types of annealing and normalizing heat treatment operations commonly used in bearing production
A simple understanding of the processing sequence of metal heat treatment