Let's take a look at the introduction to the combination of various metal heat treatment processes
Release time:
2022-03-22
The "Four Fires" have evolved into different metal heat treatment processes with different heating temperatures and cooling methods. The process of combining quenching and high-temperature tempering to obtain specific strength and toughness is called quenching and tempering. After quenching certain alloys to form supersaturated solid solutions, they are kept at room temperature or a slightly higher appropriate temperature for a longer period of time to increase the hardness, strength, or electrical magnetism of the alloy. This heat treatment process is called aging treatment.
The "Four Fires" have evolved into different metal heat treatment processes with different heating temperatures and cooling methods. The process of combining quenching and high-temperature tempering to obtain specific strength and toughness is called quenching and tempering. After quenching certain alloys to form supersaturated solid solutions, they are kept at room temperature or a slightly higher appropriate temperature for a longer period of time to increase the hardness, strength, or electrical magnetism of the alloy. This heat treatment process is called aging treatment.
The method of closely combining pressure processing deformation with heat treatment to achieve good strength and toughness coordination of the workpiece is called deformation heat treatment; The heat treatment carried out in a negative pressure atmosphere or vacuum is called vacuum heat treatment. It can not only prevent oxidation and decarburization of the workpiece, maintain the surface smoothness of the treated workpiece, improve the performance of the workpiece, but also undergo chemical heat treatment by introducing an infiltration agent.
Surface heat treatment is a metal heat treatment process that only heats the surface of a workpiece to change its mechanical properties. In order to only heat the surface of the workpiece without excessive heat transfer into the workpiece, the heat source used must have a high energy density, that is, to provide a large amount of heat energy on a unit area of the workpiece, so that the surface or local area of the workpiece can reach high temperature in a short time or instantaneously. The main methods of surface heat treatment include flame quenching and induction heating heat treatment. Commonly used heat sources include flames such as acetylene or propane, induced current, laser, and electron beam.
Chemical heat treatment is a metal heat treatment process that involves changing the chemical composition, structure, and properties of the surface layer of a workpiece. It differs from surface heat treatment in that the latter changes the chemical composition of the surface of the workpiece. Chemical heat treatment is the process of heating a workpiece in a medium (gas, liquid, solid) containing carbon, nitrogen, or other alloying elements, and holding it for a long time, thus allowing the surface of the workpiece to infiltrate elements such as carbon, nitrogen, boron, and chromium. After infiltration of elements, other heat treatment processes such as quenching and tempering are sometimes required. The main methods of chemical heat treatment include carburization, nitriding, and metal infiltration.
Metal heat treatment is one of the important processes in the manufacturing of mechanical components and molds. Generally speaking, the metal heat treatment process can guarantee and improve various properties of the workpiece, such as wear resistance, corrosion resistance, etc. It can also improve the microstructure and stress state of the blank to facilitate various cold and hot processing.
For example, white cast iron can be annealed for a long time to obtain malleable cast iron, which increases plasticity; The gear adopts the correct heat treatment process and has a long service life; In addition, inexpensive carbon steel has certain valence properties of alloy steel by infiltrating certain alloy elements, which can replace certain heat-resistant steel and stainless steel; Tools and molds generally require heat treatment before use.
With the increasing maturity of laser and plasma technologies, using these two technologies and applying a layer of other wear-resistant, corrosion-resistant or heat-resistant coatings on the surface of ordinary steel workpieces to change the surface properties of the original workpiece, this new technology is called surface modification.
Related News
Good news! Our company won the Changzhou Innovation and Entrepreneurship Competition!
What is homogenization annealing of metal heat treatment?
Types of annealing and normalizing heat treatment operations commonly used in bearing production
A simple understanding of the processing sequence of metal heat treatment