The main analysis of preheating before metal heat treatment welding


Release time:

2022-03-22

The welding of important components, alloy steel, and thick components requires preheating before welding.

The welding of important components, alloy steel, and thick components requires preheating before welding. The main functions of preheating before metal heat treatment welding are as follows:

1. It can slow down the cooling rate after welding, facilitate the escape of diffusing hydrogen in the weld metal, and avoid the generation of hydrogen induced cracks. At the same time, it also reduces the degree of hardening of the weld seam and heat affected zone, improving the crack resistance of the joint.

2. Can reduce welding stress. Uniform local preheating or overall preheating can reduce the temperature difference (also known as temperature gradient) between the welded parts in the welding area. In this way, on the one hand, the welding stress is reduced, and on the other hand, the strain rate is reduced, which is conducive to avoiding the occurrence of cracks.

3. It can reduce the restraint of welding structures, which is very significant for reducing the restraint of corner joints. As the preheating temperature increases, the occurrence rate of cracks decreases.

The selection of preheating temperature and interlayer temperature before metal heat treatment welding is not only related to the chemical composition of steel and welding rods, but also to the rigidity, method, environmental temperature, etc. of the welding structure. These factors should be comprehensively considered before determining. In addition, the uniformity of preheating temperature in the direction of steel plate thickness and in the weld area has an important impact on reducing welding stress. The width of local preheating should be determined based on the restraint of the welded part, generally 3 times the wall thickness around the weld area, and should not be less than 150-200 millimeters. If the preheating is not uniform, not only will it not reduce stress, but it will also increase stress.


Related News


Good news! Our company won the Changzhou Innovation and Entrepreneurship Competition!

The homogenization annealing of metal heat treatment is also known as diffusion annealing. An annealing method applied to ingots or castings of steel and non-ferrous alloys (such as tin bronze, silicon bronze, white copper, magnesium alloys, etc.).

What is homogenization annealing of metal heat treatment?

The homogenization annealing of metal heat treatment is also known as diffusion annealing. An annealing method applied to ingots or castings of steel and non-ferrous alloys (such as tin bronze, silicon bronze, white copper, magnesium alloys, etc.).

Types of annealing and normalizing heat treatment operations commonly used in bearing production

Stress relieving annealing normalizing heat treatment is mainly used to eliminate internal stress in castings, forgings, welded parts, hot-rolled parts, and other components.

A simple understanding of the processing sequence of metal heat treatment

The metal heat treatment process is the same as the processing of other items and has many different operating processes and sequences. Therefore, in order to ensure the smooth operation sequence, we need to have a specific understanding to avoid operational errors that affect the use of equipment.